Produse pentru echipamente laborator (313)

The curelog is a precise radiometer with dose measurement and up to four spectral ranges. Due to its fast and precise measurements the curelog can universally be used for applications in the fields of lacquer curing, bonding, sterilization, disinfection, lithography and many other applications. The adjustable data recording rate of up to 2000 Hz (measurements per second) allows reliable measurements on fast running UV belt systems. The recording time of up to 180 h allows the measurement of long-lasting processes at low doses, like UV disinfection. The curelog simultaneously records up to four spectral ranges, each with a high-precision 24 bit ADC. The high-precision ADC gives the curelog a extrem high dynamic range. The resolution of 0.0001 mW/cm² and a measurement range of 50 W/cm² are the main features of the curelog. All common UV lamps and UV-LEDs can be measured and compared, no matter if spot or area lamps, fibre optics or UV/VIS LEDs are used. Display:graphical, 128 x 64 px Dimensions:62,5 x 100 x 14 mm³ Weight:~125 g PC interface:USB System requirements:Windows 10 / 11

The radiometer RM-12 is a precise, hand-held device for measuring irradiances and illuminances. Due to the sensor-integrated electronics, different sensors for UV and visible spectral ranges can be measured with the respective sensors. Sensors evaluating biological effects of irradiation are also available. The integrated diffuser serves to provide the cosine correction that is necessary with non-perpendicular irradiation. The sensors are calibrated with traceability to the PTB; after being calibrated, they are supplied with a factory calibration certificate. Repair and spare parts service is, of course, available for many years. The sensors can be supplied with different measuring ranges. APPLICATIONS: Measurement of UV lamps, UV LEDs, and light sources Controll of UV irradiation Measurement of job security due to artificial optical radiation Photometric measurements Measuring range:0 - 199 mW/cm² Resolution:10 lx Dimensions:160 x 85 x 35 mm Weight:300 g Battery lifetime:up to 50 h

Equipo de laboratorio, dosificación precisa, bureta de vidrio a prueba de astill - La bureta de titración con protector antiastillamiento es una bureta de uso rápido según Dr. Schilling con banda Schellbach, aspiración de punto cero automática y dosificador Bürkle. La bureta de vidrio tiene un revestimiento de plástico que mejora la resistencia a la rotura y al astillamiento. Esta bureta es mucho menos susceptible a la rotura que una bureta convencional y, en el improbable caso de que sucediera, no se forman astillas peligrosas. El dosificador Bürkle permite realizar una dosificación precisa y una titración exacta utilizando el botón o el microtornillo, así como un vertido exacto a través del pico delgado. División:0.1 ml

Sample spatula made of stainless steel AISI 316L (1.4404). The highly stable and solid design of the spatula allow it to pierce solid substances or sacks and BigBags. The spatula is made of premium stainless steel, high-gloss polished and completely welded, thus completely free of undercuts. It is therefore ideally suited for taking samples of powders, granulates and pasty media, especially in food and pharmaceutical applications. Material:AISI 316L (1.4404) Volume:50 ml Insertion depth:188 mm Total length:300 mm

The UV inline sensor FLT is a compact, and precise measuring system for irradiance measurements in UV facilities, as packaging systems disinfection systems systems for surface activation UV curing systems Aging & test chambers The system consists of a compact inline sensor for fixed installation or use with radiometer RMD / RM-12. Reference measurements are simple and precise due to indentical shape of both sensor versions. Our product range includes eight spectral ranges and four measuring ranges for the sensors. This allows the radiometric sensors to be optimally adapted for the application. The sensors are calibrated with traceability to PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are supplied with a factory calibration certificate. The RMD is characterized by a very high resolution, a high measuring range, a data interface and the illuminated graphic display. Dimensions:68 x 25 x 15 mm Weight:~ 70 g Measurement range:0 - 20 W/cm² Operation temperature:0 to 60 °C Storage temperature:-10 to 60 °C

The irradiation chamber BS-02 is compact, robust equipment for the time- or dose-controlled irradiation of samples with UV radiation. The chamber can be fully equipped for one of the spectral regions UV-C, UV-B, or UV-A to achieve the highest irradiance. Alternately, the use of two separately controlled lamp groups for different spectral regions allows for especially flexible operation of the chamber. With interchangeable lamps, the BS-02 is really flexible. No tools are required for lamp replacement. The interior irradiation chamber has a base area of 49 x 32 cm² and a height of 23 cm. The sample chamber operating temperature is about 25°C - 30°C so that thermal damage to the specimen is avoided. Due to the high uniformity of the irradiation, the samples may be positioned in any order. For the BS-02 we offer two irradiation controllers, the UV-MAT and the UV-MAT Touch. Interior chamber:49 x 32 x 23 cm Dimensions:58 x 40 x 47 cm Power consumption:180 W Lamp lifetime UVA:up to 4.000 h Lamp lifetime UVB:up to 4.000 h Lamp lifetime UVC:up to 9.000 h Irradiance UVA:8 mW/cm² Irradiance UVB:5 mW/cm² Irradiance UVC:10 mW/cm²

Sprühflaschen mit Pumpzerstäuber und Schutzkappe für die Pumpe. Per Knopfdruck lassen sich Flüssigkeiten umweltschonend feinst zerstäuben. Durch die transparenten Flaschen lässt sich der Inhalt gut erkennen. Die Schutzkappe verhindert unbeabsichtigtes Drücken der Pumpe und dient als Staubschutz.

Cuchara de dosificación de acero inoxidable en set de 4 unidades, para dosificar y medir en forma sencilla y rápida, de 1,25 hasta 15 ml. El volumen está impregnado en el mango de cada cuchara. Material:Acero inoxidable V2A (1.4301) Capacidad:1,25 - 15 ml

La cuillère avec spatule est disponible pour de multiples applications. Elle est équipée d’un côté d’une cuillère et, de l'autre, d’une spatule. Elle permet donc d'échantillonner et de traiter différents fluides, comme par ex. des poudres, granulés, pâtes ou des liquides. Côté cuillère, deux contenances sont proposées : 4 et 11 ml. Fabriquée en inox en une seule pièce, la cuillère avec spatule est exempte de tous bords, rainures ou fissures. Des résidus et des détergents ne peuvent donc pas se déposer, évitant ainsi des impuretés ou une contamination croisée. La cuillère avec spatule convient parfaitement à l’utilisation dans l’industrie chimique, pharmaceutique, agro-alimentaire et dans la filière cosmétique-parfums. Matériel:Inox V2A (1.4301)

The UV LED chamber BSL-04 is the largest irradiation chamber in the BSL series. The high irradiance combined with the exact dose control offers a unique reproducibility for perfect results! The wavelengths 365 nm, 385 nm, 395 nm, 405 nm and 450 nm are available for your application. Due to the irradiance of up to 110 mW/cm² and the high homogeneity, even very large parts or batches can be irradiated. For high irradiances, the UV LED chamber can be ordered completely with one LED wavelength. A particularly flexible application is possible when two separately controllable LED wavelengths are ordered. Compared with our irradiation chambers of the BS series, the BSL-04 offers an irradiance that is 14 times as high. The high irradiance allows for extremely short exposure times. With the high homogeneity of the irradiation, the samples can also be positioned as needed. Interior chamber:86 x 64 x 28 cm Dimensions, chamber:95 x 82 x 70 cm Weight:~ 80 kg Power consumption:1200 W Mains:100 - 240 V, 50/60 Hz

Cette spatule, tout comme une palette ou une spatule pharmaceutique, permet d’appliquer, de répartir ou de lisser les fluides visqueux (pâtes ou crèmes). Elle est dotée d’une longue lame étroite, polie haute brillance, permettant de travailler avec une grande précision. La poignée stable est agréable à tenir. Cette spatule convient à l’utilisation dans l’industrie chimique et pharmaceutique. Matériel:Inox V2A (1.4301)

Trichtergestell mit zwei Trichterhaltern und zwei Reduzier-Einsätzen. Platzsparendes Design mit zwei praktischen Abstellflächen. Robustes und standfestes Trichtergestell, chemikalienbeständig, bruchsicher und stufenlos höhenverstellbar. Das Trichtergestell eignet sich für alle Trichter von 40 bis 180 mm Durchmesser. Für kleine Trichter können die Trichterhalter mit Reduzier-Einsätzen verwendet werden. Die Trichtergestelle können auch hervorragend als Filtriergestell eingesetzt werden. Durch ein innovatives Magnetkonzept sind keine Klemmschrauben notwendig, die Trichterhalter können einfach, flexibel und einhändig in der Höhe angepasst werden. Das Laborgestell lässt sich über entsprechendes Zubehör flexibel anpassen, z.B. mit zusätzlichen Trichterhaltern oder mit einer Halterung für Imhoff-Trichter. Zudem kann das Trichtergestell auch in ein Pipettengestell umgewandelt werden. Material:PP, Stahl verchromt Einstellbare Höhe:bis 450 mm Für Trichter:Ø 40–180 mm

With the UV LED chamber BSL-02, we offer you a versatile irradiance chamber on a basis of high quality UV LEDs. The most common UV curing adhesives can be applied, due to the high irradiance of 400 mW/cm². Compared to our irradiance chambers of the series BS, the series BSL-02 offers the 40-fold irradiance. In addition, the high irradiance allows for very short exposure times. With the typical UV LED characteristics like „Instant-Start“, the dimmability and the long service life, the BSL-02 is ideal for laboratory tests and the manual production. The irradiance is adjustable from 2% to 100%. The integrated timer controls the irradiance precisely. For even better results, we recommend one of our calibrated UVA+ sensors. The dose control is already integrated in the UV-MAT Touch and UV-MAT control units in the BSL-02 UV LED chamber. Interior chamber:46 x 32 x 25 cm Dimensions, chamber:55,5 x 40 x 43 cm Weight:~ 40 kg Power consumption:600-1200 W Mains:100 - 240 V, 50/60 Hz Cooling:air cooling

The BSM-03 UV curing chamber with an output of 2 kW is best suited for large-area UV curing, hardening, and bonding. The internal shutter is controlled by the UV-MAT for an accurate dose so that reproducible exposure is achieved even with medium-pressure lamps. With irradiance of 150 mW/cm², the required dose is typically achieved within several seconds. The UV curing chamber can be opened for loading and unloading while the lamp is on. The shutter is monitored and closed with a safety circuit so that no UV radiation is emitted outside the chamber. The sliding sample support also facilitates loading and unloading. It withstands all loads up to 20 kg. With 60 x 40 cm at the base and a height of 25 cm, the irradiation room offers plenty of space. The sample chamber temperature is about 45°C in operation. Due to the high uniformity of the irradiation, the samples may be positioned in any order. UV curing UV sealing UV bonding UV gluing surface activation Interior chamber:60 x 40 x 25 cm Dimensions:77 x 62 x 80 cm Weight:~ 80 kg Power consumption:2200 W (irradiation) Lamp lifetime:1.000 h to 3.000 h, typical

The irradiation chamber BSH-02 is a high-powered UVC chamber with superior irradiance of 85 mW/cm². Like all BS irradiation chambers, the BSH-02 offers time- or dose-controlled irradiation of samples with UV light. The chamber is fully equipped with ozone-free UVC amalgam lamps with a total lamp power of 750 W. Compared to our standard BS series, the BSH-02 offers irradiance that is 750% higher. Thus, the irradiance is high enough for high-energy applications or UV curing. The BSH-02 has compact outer dimensions and the interior irradiation chamber has a base area of 46 x 32 cm and a height of 25 cm. The sample chamber operating temperature is about 45°C so that thermal damage to the specimen is minimized. Due to the high uniformity of the irradiation, the samples may be positioned in any order. Interior chamber:46 x 32 x 25 cm Dimensions, chamber:55,5 x 40 x 43 cm Weight:~ 32 kg Power consumption:1000 W Lamp lifetime:up to 8.000 h

The spatula-spoon can be used in many different applications. The double-sided multi-purpose spoon is a spoon on one side and a spatula on the other. This makes it possible to sample and process a variety of media such as powders, granulates, pastes and liquids. The spoon side of the spoon-spatula holds 4 ml or 11 ml respectively. Manufactured from a single piece of stainless steel, the spoon-spatula has no edges, crevices or undercuts. Because of this, product residue or cleaning agents cannot be deposited and the possibility of cross-contamination or impurities is excluded. That makes the poly-spoon ideal for use in chemistry, the pharmaceutical industry, cosmetics and the food industry. Material:Stainless steel (1.4301)

The stand for sedimentation funnels is used to keep, hold or store Imhoff funnels safely and reliably during sedimentation. Two funnel holders ensure that Imhoff funnels will be held safely and securely and can be placed in an absolutely vertical position. Stand with two holders for sedimentation funnels, suitable for funnels 90 mm or more in diameter. Thanks to an innovative magnet concept no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand. With the corresponding accessory the holders for Imhoff funnels can also be replaced by holders for all-purpose funnels. Material:PP, chrome-plated steel Adjustable height:up to 450 mm

The disposable powder funnel has a short, wide discharge and is suitable for transferring powered samples and materials, granulates ans suspension as well as other liquids. The wide opening of the disposable powder funnel prevents the powder or granulates from clogging while dispensing. That makes this practical and hygenic pouring aid a helpful accessory for sampling or in laboratories. In combination with a filter paper the disposable funnel is also well suited for filtering. The sturdy disposable funnel for powdered substances is ideal for use in laboratories and clean rooms or for sampling. It can be used in pharmaceuticals, chemistry and cosmetics and the food and animal feed industries, as well as all areas where special purity is important.

The dose controller UV-MAT continuously measures irradiances, calculates doses, and stops irradiation at the set target dose. Two spectral ranges can be separately controlled. Thus, UV-MAT ensures a constant dose independent from lamp aging, temperature, and pollution. The measurements are made with calibrated radiometric sensors. The built-in diffusers ensure the cosine correction that is required for non-vertical irradiation. The sensor contains an extremely precise analog-digital converter and a temperature sensor. The integrated diffuser ensures the required cosine correction. Excellent long-term stability is achieved through the use of appropriate materials. The sensors are calibrated with traceability to PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are supplied with a factory calibration certificate. Sensor connectors:24 bit, fully digital Number of sensors:2 pcs (for BS series) / 1 pc (for BSL series) Dose range:0 - 1.000.000 J/cm² Dose resolution:1 mJ/cm² AD conversion:24 bit PC interface:USB 2.0 Sensor identification:yes Dimensions:185 mm x 251 mm x 100 mm

The sample containers sterile are sterilised by irradiation and correspond to a sterility assurance level Sterile SAL 10-3 (according to ISO 11137) inside. The handy and universally applicable sample jar is easy to fill, smooth-walled and free of undercuts, therefore it can be emptied completely. It is an excellent universal container for all liquid and solid contents. The attached lid of the sample container can be opened with one hand and fixed at a 90° angle. This leaves the other hand free to take samples. Liquid/condensate in the lid runs into a collecting channel integrated in the lid, nothing is lost, nothing can drip off. The sample boxes are closed while hot during production. Due to this process, the sample boxes close absolutely tightly, as the lid and box adapt optimally during the cooling process. The sample container made of PP is highly transparent, the contents of the container can be easily recognised. Material:PP, transparent Capacity:50 ml - 90 ml - 300 ml

La espátula detectable SteriPlast® de poliestirol azul se fabrica y embala individualmente para el uso desechable en nuestra sala blanca de Categoría 7 (10.000). Por último, se esteriliza con rayos gamma. Gracias a su mango largo, ergonómico y resistente, así como a una hoja puntiaguda, este producto desechable puede introducirse directamente en el recipiente o clavarse en sacos de papel o plástico. La espátula detectable es ideal para recoger muestras de polvo, granulado y pastas. Complementariamente al color azul, estos muestreadores tienen un componente adicional especial en el material que permite su visibilización con ayuda de detectores metálicos o rayos X. Estos productos pueden descartarse así mediante los sistemas convencionales de control de cuerpos extraños a pesar de haber sido producidos de plástico. Material:PS detectable, azul

El colector de muestras doble Novartos Multi puede recoger una muestra doble en varios puntos de varias zonas de muestra predefinidas. Para la toma doble de muestra, se montan cuatro, siete o nueve cámaras de recogida (según la longitud) con dos tomadores de muestras cada una.

La cuchara espátula ofrece muchas posibilidades. Esta cuchara multiusos de doble cara tiene una cuchara en un lado y una espátula en el otro. De esta forma, puede utilizarse para recoger muestras y procesar diferentes sustancias, como polvo, granulado, pastas o líquidos. La cara de la cuchara tiene 4 ml u 11 ml de capacidad. La espátula de cuchara es de acero inoxidable y de una sola pieza, por lo que no tiene bordes, surcos ni muescas. Gracias a esto, no existe riesgo de que se depositen restos de producto y de materiales de limpieza y, por consiguiente, tampoco de ensuciamiento ni de contaminación cruzada. El resultado es una cuchara multiusos ideal para los sectores químico, farmacéutico, cosmético y alimentario. Material:Acero inoxidable V2A (1.4301)

The irradiation chamber BS-02CT is a chamber to test samples according IEC 60335-1: “Household and similar electrical appliances – Safety – Part 1: General requirements - Edition 5.2” This test is designed for non-metallic materials that are exposed to direct or reflected UVC radiation from 200 nm to 280 nm. The test can be used to test radiation stability against UVC radiation that can cause aging like discolorations, changes in material properties, crack formation and smell. Therefore the UVC low pressure mercury lamps emit a continuous spectral irradiance of 10 W/m² at 254 nm. IR heater heat up the samples so that a black-panel temperature of 63 °C ± 3 °C can be reached and controlled. The time can be set to an exposure duration of 1000 h. The irradiation chamber BS-02CT can also be used to test material properties that are disinfected by UV-C. Typically the UVC dose of a daily disinfection for a period of two years can be accelerated to 12 hours. Interior chamber:46 x 32 x 23 cm Dimensions, chamber:58 x 40 x 47 cm Weight:~ 32 kg Power consumption:700 W Mains:110 - 230 VAC, 50/60 Hz

Anders als bei herkömmlichen Schöpfern sind beim Schöpfer Edelstahl keine Öffnungen, Hinterschneidungen oder Spalten vorhanden, in denen sich Rückstände absetzen könnten. Verarbeitung porenfrei durch hochwertige Laser-Schweißnähte. Der Schöpfer Edelstahl ist flammsterilisierbar und kann somit komplett keimfrei gemacht werden. Gesamtlänge:115 cm Inhalt:1000 ml

Prácticas cubetas de laboratorio con una gran variedad de aplicaciones. Son apilables, resistentes, irrompibles y a prueba de torsión. Las cubetas poseen un sólido borde redondeado. Apropiadas para recoger líquidos y sustancias peligrosas para el medio ambiente o agresivas. Indicadas para experimentos, como cubetas para materiales corrosivos y también para instrumentos o medicinas, para revelado fotográfico, presentación de productos o exposición de alimentos. Material:PP

Équipement de laboratoire, dosage précis, burette de verre anti-éclats - La burette de titration avec protection contre les éclats est une burette à fonctionnement rapide selon le Dr. Schilling, avec des bandes Schellbach, aspiration automatique de points zéro et une armature de dosage Bürkle. Un gainage en plastique de la burette de verre augmente la résistance à la casse et fait office de protection contre les éclats. La probabilité que la burette casse une fois est bien inférieure à une burette classique et si cela devait malgré tout se produire, aucun éclat dangereux n'est généré. L'armature de dosage de Bürkle permet un dosage précis et une filtration fine exacte via le bouton poussoir ou via la micro-vis ainsi qu'une sortie précise via une pointe de sortie fine. Graduations:0.1 ml

In contrast to conventional scoops, the stainless steel scoop has no openings, undercuts or crevices in which residues could collect. Pore-free finishing produced by high-quality laser welding seams. The stainless steel scoop can be flame-sterilised and can therefore be made completely germ-free. Material:stainless steel AISI 304 (1.4301) Total Length:115 cm Capacity:1000 ml

Soporte para embudos con dos fijaciones de embudo y dos insertos reductores. Diseño con reducidas dimensiones, con dos superficies prácticas de apoyo. Soporte para embudos robusto y firme, resistente a productos químicos, irrompible y con regulación continua de altura. El soporte para embudos es idóneo para todos los embudos con un diámetro de 40 a 180 mm. Para embudos pequeños pueden usarse soportes de embudo con insertos reductores. Los soportes para embudos se pueden usar también muy bien como soportes de filtración. Gracias al innovador sistema magnético no se requieren tornillos de apriete y los soportes de embudo pueden adaptarse en su altura de forma sencilla, flexible y con una sola mano. El soporte para laboratorio puede adaptarse flexiblemente con los accesorios, p. ej. con fijaciones de embudo adicionales o bien una fijación para embudos Imhoff. El soporte para embudos puede convertirse también en un soporte para pipetas. Material:PP, acero cromado Altura ajustable:Hasta 450 mm Para Ø de embudo:40–180 mm

Das Gestell für Sedimentiertrichter dient der sicheren und praktischen Aufbewahrung, Halterung oder Lagerung von Imhoff-Trichtern während der Sedimentation. Durch zwei Trichteraufnahmen stehen die Imhoff-Trichter gesichert, stabil und können absolut senkrecht positioniert werden. Gestell mit jeweils zwei Halterungen für Sedimentiertrichter, passend für Trichter ab 90 mm Durchmesser. Durch ein innovatives Magnetkonzept sind keine Klemmschrauben notwendig, die Trichterhalter können einfach, flexibel und einhändig in der Höhe angepasst werden. Über entsprechendes Zubehör können die Halterungen für Imhoff-Trichter auch durch Halterungen für Allzwecktrichter ausgetauscht werden. Material:PP, Stahl verchromt Einstellbare Höhe:bis 450 mm